首页 » Blog » Mechanical properties of stainless steel precision casting and its production and processing regulations

Mechanical properties of stainless steel precision casting and its production and processing regulations

Posted by: CCHEN JIANG 2020-11-16 Leave a comment

In the whole process of application of stainless steel precision casting, the temperature can be ensured at the necessary level to ensure that its solution has very good circulation during the whole process of refilling. Stainless steel precision stainless steel casting china must be based on its refilling process in the whole process of selecting temperature. The distance and the temperature reduction in the whole process of refilling and the total flow rate and other factors can be confirmed.

When stainless steel precision casting is used, the forged round ingot has a low tendency to crack. When used, it must be ensured that its aluminum alloy has its excellent exhaust pipe feeding ability. When used, it is to create a sequential crystal standard and a reasonable increase. The relative density of its products is usually high at forging temperature.

Stainless steel precision casting is aimed at small-diameter ingots. Due to the small size of the interlaced belt, its physical properties are good. Under normal conditions, the liquidity can be considered and no bright crystals are produced. The temperature is 715~740℃. High tendency.

The physical properties of stainless steel precision stainless steel casting china in the whole process of application are usually higher than those of pig iron. However, the characteristics of pig iron of such raw materials are somewhat inferior. The product is relatively molten in the whole process of manufacturing. It is higher than other raw materials, because the steel solution can easily cause air oxidation during the whole process of production and processing.

There are many problems that must be paid special attention to in the production and processing of stainless steel precision casting. The fundamental reason is that the circulation of molten steel is relatively weak. In the whole process of production and processing, people can reasonably avoid insufficient pouring of stainless steel castings. Waving is a cold barrier, so the thickness of the stainless steel stainless steel casting china cannot be less than 8 mm.

The construction force of the pouring system software of stainless steel precision casting is relatively simple. In the whole process of application, the cross-sectional specification of the machine and equipment. If the pig iron is large, its hot metal mold can be used in the whole process of production and processing. Or dry metal mold casting.

发表评论

您的电子邮箱地址不会被公开。 必填项已用*标注